View previous topic :: View next topic |
Author |
Message |
olds1959special Regular Member
Joined: 06 May 2020 Posts: 11
|
Posted: Fri May 15, 2020 10:39 am Post subject: Best cornet mouthpiece for high notes? |
|
|
What’s the best cornet mouthpiece for high notes? |
|
Back to top |
|
|
delano Heavyweight Member
Joined: 18 Jan 2009 Posts: 3118 Location: The Netherlands
|
Posted: Fri May 15, 2020 10:53 am Post subject: |
|
|
All the cornet mouthpieces for high notes are made for piccolos with a cornet shank. Forget about the high notes, nobody plays a cornet for the high notes. I read your other posts and it's more important that start to learn to play and there is now no reason to worry about high notes. |
|
Back to top |
|
|
cheiden Heavyweight Member
Joined: 28 Sep 2004 Posts: 8939 Location: Orange County, CA
|
Posted: Fri May 15, 2020 11:16 am Post subject: |
|
|
Beginners on the cornet will not benefit by using any specialized mouthpiece and doing so will very likely complicate your progress. Best to get a standard middle of the road piece until you reach a level of competence than you'll be in a position to consider more specialized hardware.
Per a brief research your particular Olds horn (in a previous post) should use a standard cornet shank. You'd do well to start with a stock Yamaha 11C4 (a little deeper) or 11B4 (a little shallower). Neither of these pieces will likely produce the characteristic tone often sought in the British brass band tradition. Pffft... Start here and get your legs about you first then refine from there. _________________ "I'm an engineer, which means I think I know a whole bunch of stuff I really don't."
Charles J Heiden/So Cal
Bach Strad 180ML43*/43 Bb/Yamaha 731 Flugel/Benge 1X C/Kanstul 920 Picc/Conn 80A Cornet
Bach 3C rim on 1.5C underpart |
|
Back to top |
|
|
giakara Heavyweight Member
Joined: 13 Jul 2003 Posts: 3835 Location: Greece
|
Posted: Fri May 15, 2020 12:43 pm Post subject: |
|
|
https://youtu.be/rGoV0TZAt5s
Some high notes on cornet.
Regards _________________ Lawler TL5-1A Bb 2015
Lawler TL6-1A Bb 2004
Lawler TL5-1A Bb 2003
Getzen eterna 910 C
Getzen eterna 850 cornet
Selmer Paris 3 valve picc
Yamaha 731 flugel
Carol mini pocket
Reeves/Purviance mpcs |
|
Back to top |
|
|
Vin DiBona Heavyweight Member
Joined: 24 Dec 2003 Posts: 1475 Location: OHare area
|
Posted: Fri May 15, 2020 2:06 pm Post subject: |
|
|
There's a nice "high note" at the end of this piece.
https://www.youtube.com/watch?v=nEmk68U9otQ
Start at 4:29, but I suggest you listen to the whole thing and hear a great player playing the cornet properly. (This is actually written for trumpet, not cornet).
Schwarz was playing a plain old Bach 37 cornet and a 5C mouthpiece.
R. Tomasek |
|
Back to top |
|
|
Crazy Finn Heavyweight Member
Joined: 27 Dec 2001 Posts: 8348 Location: Twin Cities, Minnesota
|
Posted: Fri May 15, 2020 2:17 pm Post subject: |
|
|
cheiden wrote: | Beginners on the cornet will not benefit by using any specialized mouthpiece and doing so will very likely complicate your progress. Best to get a standard middle of the road piece until you reach a level of competence than you'll be in a position to consider more specialized hardware.
Per a brief research your particular Olds horn (in a previous post) should use a standard cornet shank. You'd do well to start with a stock Yamaha 11C4 (a little deeper) or 11B4 (a little shallower). Neither of these pieces will likely produce the characteristic tone often sought in the British brass band tradition. Pffft... Start here and get your legs about you first then refine from there. |
This.
The best mouthpiece for high notes on a cornet?
Your normal mouthpiece + practice. _________________ LA Benge 3X Bb Trumpet
Selmer Radial Bb Trumpet
Yamaha 6335S Bb Trumpet
Besson 709 Bb Trumpet
Bach 184L Bb Cornet
Yamaha 731 Bb Flugelhorn |
|
Back to top |
|
|
delano Heavyweight Member
Joined: 18 Jan 2009 Posts: 3118 Location: The Netherlands
|
Posted: Sat May 16, 2020 8:57 am Post subject: |
|
|
giakara wrote: | https://youtu.be/rGoV0TZAt5s
Some high notes on cornet.
Regards |
Though they are not really high (some high C's) it's indeed possible to play high notes on a cornet. If my post suggest otherwise sorry. I meant to say that the cornet is mostly played in a different way than a trumpet and that high notes are as a rule not the first priority of a cornet player. But yes, in the old style you find cornet players whose style is a little bit different from what is called 'the true cornet sound'. |
|
Back to top |
|
|
trumpet_cop Veteran Member
Joined: 18 Jun 2013 Posts: 242
|
Posted: Sat May 16, 2020 10:51 am Post subject: |
|
|
Vin DiBona wrote: | There's a nice "high note" at the end of this piece.
https://www.youtube.com/watch?v=nEmk68U9otQ
Start at 4:29, but I suggest you listen to the whole thing and hear a great player playing the cornet properly. (This is actually written for trumpet, not cornet).
Schwarz was playing a plain old Bach 37 cornet and a 5C mouthpiece.
R. Tomasek |
Thought this was going to be Slavische Fantasy or Sounds from the Hudson.. where the ending high note is played on- oops.. almost gave away the secret!! _________________ Good Ol' Boy ID#3624360 |
|
Back to top |
|
|
olds1959special Regular Member
Joined: 06 May 2020 Posts: 11
|
Posted: Sun May 17, 2020 6:15 pm Post subject: Yamaha 6B4 |
|
|
What about the Yamaha 6B4? |
|
Back to top |
|
|
Crazy Finn Heavyweight Member
Joined: 27 Dec 2001 Posts: 8348 Location: Twin Cities, Minnesota
|
Posted: Sun May 17, 2020 7:30 pm Post subject: Re: Yamaha 6B4 |
|
|
olds1959special wrote: | What about the Yamaha 6B4? |
https://usa.yamaha.com/products/musical_instruments/winds/mouthpieces/trumpets/comparison_chart.html
Yamaha uses the Schilke numbering scheme. Bachmouthpieces use a different scheme.
- The first number roughly corresponds to diameter - with the smaller number being a smaller diameter. A 16 and 17 is quite wide, the 6 fairly narrow, and the 11 somewhat in the middle.
- The capital letter after the number is the cup depth. A is shallow, D, E, and F are deep. D is pretty much the deepest trumpet cup, with E appearing on British-style short shank cornet mouthpieces, and F on flugel and mellophone mouthpieces.
- The next number is the rim shape, from round to flat (1-4). Most Yamaha trumpet mouthpieces have a "4" rim, somewhat flat. Schilke mouthpieces tend to vary more with rim number.
- If there is a lower case letter after the number, it indicates a different backbore. The only one I know of is the "a" on mouthpieces like the 14A4a.
Thus, 6B4:
6 - narrow diameter
B - medium shallow cup
4 - somewhat flat rim _________________ LA Benge 3X Bb Trumpet
Selmer Radial Bb Trumpet
Yamaha 6335S Bb Trumpet
Besson 709 Bb Trumpet
Bach 184L Bb Cornet
Yamaha 731 Bb Flugelhorn |
|
Back to top |
|
|
blbaumgarn Heavyweight Member
Joined: 26 Jul 2017 Posts: 705
|
Posted: Sun May 17, 2020 9:51 pm Post subject: best cornet mouthpiece for high notes |
|
|
My personal opinion is to practice with the mouthpiece you like best with the cornet you play. I have always felt that improving the higher register comes with improving technique and air support. _________________ "There are two sides to a trumpeter's personality,
there is one that lives to lay waste to woodwinds and strings, leaving them lie blue and lifeless along a swath of destruction that is a
trumpeter's fury-then there is the dark side!" Irving Bush |
|
Back to top |
|
|
GordonH Heavyweight Member
Joined: 16 Nov 2002 Posts: 2894 Location: Edinburgh, Scotland
|
Posted: Mon May 18, 2020 3:51 am Post subject: |
|
|
Not sure the mouthpiece affects range much, but it does affect tone and security. I have an MF Jet-Tone for emergencies! _________________ Bb - Scherzer 8218W, Schilke S22, Bach 43, Selmer 19A Balanced
Pic - Weril
Flugel - Courtois 154
Cornet - Geneva Heritage, Conn 28A
Mouthpieces - Monette 1-5 rims and similar.
Licensed Radio Amateur - GM4SVM |
|
Back to top |
|
|
giakara Heavyweight Member
Joined: 13 Jul 2003 Posts: 3835 Location: Greece
|
Posted: Mon May 18, 2020 4:12 am Post subject: |
|
|
I play extended dixieland gigs (more than two hours) and I use a Purviance 4*3 or a Reeves 43S for my LB cornet , I dont play extremely high but a shalow cup for me is a life saver.
Regards _________________ Lawler TL5-1A Bb 2015
Lawler TL6-1A Bb 2004
Lawler TL5-1A Bb 2003
Getzen eterna 910 C
Getzen eterna 850 cornet
Selmer Paris 3 valve picc
Yamaha 731 flugel
Carol mini pocket
Reeves/Purviance mpcs |
|
Back to top |
|
|
bike&ed Heavyweight Member
Joined: 24 Dec 2004 Posts: 1839
|
Posted: Mon May 18, 2020 8:10 am Post subject: |
|
|
trumpet_cop wrote: | Vin DiBona wrote: | There's a nice "high note" at the end of this piece.
https://www.youtube.com/watch?v=nEmk68U9otQ
Start at 4:29, but I suggest you listen to the whole thing and hear a great player playing the cornet properly. (This is actually written for trumpet, not cornet).
Schwarz was playing a plain old Bach 37 cornet and a 5C mouthpiece.
R. Tomasek |
Thought this was going to be Slavische Fantasy or Sounds from the Hudson.. where the ending high note is played on- oops.. almost gave away the secret!! |
Hee hee, yeah there is that method! |
|
Back to top |
|
|
GeorgeGoodwin New Member
Joined: 08 Jul 2017 Posts: 1 Location: Portland, Maine
|
Posted: Tue May 26, 2020 12:26 pm Post subject: |
|
|
I find that using a shorter shank helps. You often see this setup in British Brass Bands. I use a Stork 2A with a short shank and it does the trick. _________________ Yamaha 6335 HSII
Yamah 9445 CHS (Chicago Gen 1 C)
Getzen Eterna Bb Cornet
Jupiter Pic |
|
Back to top |
|
|
lipshurt Heavyweight Member
Joined: 24 Feb 2008 Posts: 2642 Location: vista ca
|
Posted: Tue May 26, 2020 3:25 pm Post subject: |
|
|
giakara links to a video of rod mason effortlessly nailing big fat solid loud locked in high G's...a bunch of them, and somebody poo poos it saying they were high C's.
Big diff between High C and big High G's
gotta love trumpet herald _________________ Mouthpiece Maker
vintage Trumpet design enthusiast
www.meeuwsenmouthpieces.com
www.youtube.com/lipshurt |
|
Back to top |
|
|
plp Heavyweight Member
Joined: 11 Feb 2003 Posts: 7023 Location: South Alabama
|
Posted: Tue May 26, 2020 8:53 pm Post subject: |
|
|
lipshurt wrote: | giakara links to a video of rod mason effortlessly nailing big fat solid loud locked in high G's...a bunch of them, and somebody poo poos it saying they were high C's.
Big diff between High C and big High G's
gotta love trumpet herald |
Wish there was a like button here, his G's were impressive, but those lip trills were awesome!
Never have been able to do them, and have probably spent more time in the woodshed trying to get trills and growls locked in than anything else, to this day still nothing I'm confident enough to use in performance.
And yes, before anyone says it, do lip bends as part of my daily warm up. Either I'm doing them wrong, or it is just never meant to be. _________________ Since all other motives—fame, money, power, even honor—are thrown out the window the moment I pick up that instrument..... I play because I love doing it, even when the results are disappointing. In short, I do it to do it.” Wayne Booth |
|
Back to top |
|
|
etc-etc Heavyweight Member
Joined: 19 Jan 2008 Posts: 6209
|
Posted: Wed May 27, 2020 12:49 am Post subject: |
|
|
Laskey PIC which I found making all registers quite effortless. |
|
Back to top |
|
|
markp Heavyweight Member
Joined: 15 Feb 2005 Posts: 2817 Location: Coarsegold, CA
|
Posted: Wed May 27, 2020 5:04 am Post subject: |
|
|
I was surprised a while back to learn that the great Warren Vache uses a Wartburton 5S. He told me when I saw him at Smalls in NYC, a performance I’ll never forget!
He used to play one of the larger Warburton 5 cups, but found he could get the sound he wanted on the smaller cup, and saw no reason not to make things easier for himself.
I was using the large GR #6 cup, but found I could use the smaller #3 for the same reasons. I’ve been wanting to get GRs #1 or #2 to see if I could actually get lead trumpet sound on my cornet—a low priority. |
|
Back to top |
|
|
Seymor B Fudd Heavyweight Member
Joined: 17 Oct 2015 Posts: 1491 Location: Sweden
|
Posted: Wed May 27, 2020 6:57 am Post subject: |
|
|
Crazy Finn wrote: | cheiden wrote: | Beginners on the cornet will not benefit by using any specialized mouthpiece and doing so will very likely complicate your progress. Best to get a standard middle of the road piece until you reach a level of competence than you'll be in a position to consider more specialized hardware.
Per a brief research your particular Olds horn (in a previous post) should use a standard cornet shank. You'd do well to start with a stock Yamaha 11C4 (a little deeper) or 11B4 (a little shallower). Neither of these pieces will likely produce the characteristic tone often sought in the British brass band tradition. Pffft... Start here and get your legs about you first then refine from there. |
This.
The best mouthpiece for high notes on a cornet?
Your normal mouthpiece + practice. |
+1!
Practice, practice and practice. It´s completely wasted time to be able to nail high D:s, Eb:s or even high F:s if you do not possess that very special sound so characteristic of the cornet. This I state as a genuine brass-bander. The mouthpiece to be used, irrespective of brand should, you propelling it, provide a mellow, round silky sound with a notable "core", more towards the flugel than the trumpet.
I have, just before the bl -y corona crisis, just for fun, used my simple Yamaha 2330II with a Schilke 143D3 for lead, easily reaching at least a nice E. But - if I had played like that in the brass band the director undoubtedly would have pierced me with the stick. _________________ Cornets: mp 143D3/ DW Ultra 1,5 C
Getzen 300 series
Yamaha YCRD2330II
Yamaha YCR6330II
Getzen Eterna Eb
Trumpets:
Yamaha 6335 RC Schilke 14B
King Super 20 Symphony DB (1970)
Selmer Eb/D trumpet (1974)
Last edited by Seymor B Fudd on Mon Jun 01, 2020 12:05 am; edited 1 time in total |
|
Back to top |
|
|
|